- 2010-2013 香港理工大学机械工程系，博士
- 2007-2009 香港理工大学机械工程系，硕士
- 2003-2007 东南大学机械工程系，学士

- 2023- now 上海交通大学机动学院，长聘副教授
- 2017-2023 上海交通大学机动学院，准聘副教授
- 2016-2017 香港科技大学机械与航空工程系，Research Fellow
- 2015-2016 香港理工大学机械工程系，Postdoctoral Fellow
- 2013-2015 香港理工大学机械工程系，Research Associate

- 2019.06-2019.07 瑞典皇家理工学院Marcus Wallenberg Laboratory for Sound and Vibration Research, Visiting Scholar
- 2012.02-2012.08 西澳大学机械与化工工程系, Visiting Scholar

目前研究方向：声学/气动声学；新概念无人机/eVTOL设计；螺旋桨/风扇空气动力学；飞行控制
欢迎对声学、微型无人机、电动垂直起降飞行器感兴趣的同学报读研究生。2025年博士名额已满，仅余硕士生名额（含硕博）

2024-2025 企业项目“涵道风扇式飞行汽车气动与噪声性能优化设计”
2024-2025 国际合作基金SJTU-KTH
2024-2026 国家自然科学基金
2024-2027 国家自然科学基金
2022-2024 专项项目“航空发动机压缩系统内声共振及短舱声振响应特性预测方法研究”
2020-2021 创新基金“低噪声无人机研究”
2020-2022 企业项目“吸油烟机振动、噪声技术研究”
2020-2021 专项项目“发动机发电机组低频振动噪声计算方法研究”
2020-2021 国家重点实验室基金“涵道尾桨气动噪声抑制技术研究”
2021-2023 国家自然科学基金“弯曲管道内无背腔穿孔板的降噪机理及其设计方法研究”
2020-2022 医工交叉研究基金“三维有限元模型在喉软化症严重程度及疗效评估中的应用”
2019-2021 创新基金“环控系统管路噪声控制研究”
2019-2020 预研基金“流激开口空腔噪声研究”
2019-2020 国家重点实验室基金“大涵道比涡扇发动机轻量化短舱声学设计理论”
2019-2020 国际合作基金SJTU-KTH
2018-2020 上海市浦江人才项目“航空发动机短舱声学设计的关键科学问题”
2017-2019 上海交通大学启动经费“航空发动机噪声控制技术”

参与：
2019-2023 国家自然科学基金重点项目“涡扇发动机宽带风扇噪声的声源反演与辐射声场重建理论与方法”
2016-2020 国家自然科学基金重点项目“基于声学黑洞效应（ABH）的波操纵及其工程应用中的力学问题研究”

期刊论文
[28] J. Li, P. Zhao, P. Wang, C. Yang*, Revisiting the sound absorption mechanisms of a finite flexible perforated panel absorber using a numerical approach, The Journal of the Acoustical Society of America 156, 2566-2577, 2024.
[27] P. Zhao, Z. Zhao, C. Yang*, Investigation of the orifice flow of over-the-rotor liner and its interaction with the rotor flow field, Physics of Fluids 10, 2023.
[26] H. Zhang, B. Li, B. Li, C. Yang*, Influence of propeller parameters on the aerodynamic performance of shrouded coaxial dual rotors in hover, Aerospace 10, 859, 2023.
[25] W. Chen, B. Jiang, C. Yang*, Attitude control of ducted UAV based on improved active disturbance rejection, Electronics Optics & Control 31(8), 16-22, 2024. (in Chinese)
[24] T. Zhong, C. Yang*, M. Åbom, Tonal noise reduction of an electric ducted fan using over-the-rotor acoustic treatment, Applied Acoustics 205, 109298, 2023.
[23] P. Zhang, Y. Huang*, C. Yang, W. Jiang, Estimate the noise effect on automatic speech recognition accuracy for mandarin by articulation index associated approach, Applied Acoustics 203, 109217, 2023.
[22] P. Zhang, C. Yang, Y. Huang*, An improved algorithm for liner impedance eduction in low signal-to-noise ratio flow duct. International Journal of Aeroacoustics, 21(3-4), 168-189, 2022.
[21] T. Zhong, C. Yang*, Application of the patch transfer function method for predicting flow-induced cavity oscillations, Journal of Sound and Vibration 521, 116678, 2022.
[20] C. Yang*, T. Zhong, J. Li, S. You, S. Yang, H. Zhang, Z. Zheng*, Extended tube acoustic metamaterial: Its modeling and application to a kitchen hood, Applied Acoustics 185, 108398, 2022.
[19] C. Yang*, A mathematical formulation for the optimal impedance of a curved axial microperforated panel in a duct bend, The Journal of the Acoustical Society of America Express Letters 1, 081601, 2021.
[18] T. Li, Z. Wang, H. Xiao, Z. Yan, C. Yang, T. Tan*, Dual-band piezoelectric acoustic energy harvesting by structural and local resonances of Helmholtz metamaterial, Nano Energy 90, 106523, 2021.
[17] P. Zhang, Y. Huang, Z. Yang, C. Yang*, W. Kang, Effect of source direction on liner impedance eduction with consideration of shear flow, Applied Acoustics 183, 108297, 2021.
[16] C. Yang*, P. Zhang, S. Jacob, E. Trigell, M. Åbom, Investigation of extended-tube liners for control of low-frequency duct noise, AIAA Journal 59, 4179-4194, 2021. (Aeroacoustics Research in Europe – 2020&2021 highlights)
[15] C. Yang, H. Xu*, Effects of the backing cavity on the acoustic absorption of a microperforated panel absorber, Applied Acoustics 166, 107361, 2020.
[14] X. Zhang, C. Yang, L. Cheng*, P. Zhang, An experimental investigation on the acoustic properties of micro-perforated panels in a grazing flow, Applied Acoustics 159, 107119, 2020.
[13] C. Yang*, Acoustic attenuation of a curved duct containing a curved axial microperforated panel, The Journal of the Acoustical Society of America 144, 501-511, 2019.
[12] C. Yang*, On the realization of acoustic attenuation using a microperforated panel alone, The Journal of the Acoustical Society of America 143, 1102-1105, 2018.
[11] C. Yang*, Y. Fang, C. Zhao, X. Zhang, On modeling the sound propagation through a lined duct with a modified Ingard-Myers boundary condition, Journal of Sound and Vibration 424, 173-191, 2018.
[10] Z. Hu, C. Yang, L. Cheng*, Acoustic resonator tuning strategies for the narrowband noise control in an enclosure, Applied Acoustics 134, 88-96, 2018.
[9] C. Yang, X. Zhang*, F. Y. Tao, D. C. C. Lam, A study of the sound transmission mechanisms of a finite thickness opening without or with an acoustic seal, Applied Acoustics 122, 156-166, 2017.
[8] C. Yang*, L. Cheng, Prediction of noise inside an acoustic cavity of elongated shape using statistical energy analyses with spatial decay consideration, Applied Acoustics 113, 34-38, 2016.
[7] C. Yang, L. Cheng*, Suppression of bending waves in a beam using resonators with different separation lengths, The Journal of the Acoustical Society of America 139, 2361-2371, 2016.
[6] C. Yang, L. Cheng*, Sound Absorption of Micro-perforated Panels inside Compact Acoustic Enclosures, Journal of Sound and Vibration 360, 140-155, 2016. (most downloaded article in JSV 2015)
[5] C. Yang, L. Cheng*, Z. Hu, Reducing interior noise in a cylinder using Micro-perforated Panels, Applied Acoustics 95, 50-56, 2015.
[4] C. Yang, J. Pan*, L. Cheng, A mechanism study of sound wave-trapping barriers, The Journal of the Acoustical Society of America 134, 1960-1969, 2013.
[3] C. Yang, L. Cheng*, J. Pan, Absorption of oblique incidence sound by a finite micro-perforated panel absorber, The Journal of the Acoustical Society of America 133, 201-209, 2013.
[2] L. Maxit, C. Yang, L. Cheng*, J. L. Guyader, Modeling of micro-perforated panels in a complex vibro-acoustic environment using Patch Transer Function approach, The Journal of the Acoustical Society of America 131, 2118-2130, 2012.
[1] C. Yang, D. Li, L. Cheng*, Dynamic vibration absorbers for vibration control within a frequency band, Journal of Sound and Vibration 330, 1582-1598, 2011. (most downloaded article in JSV 2011)

会议论文：
[30] 杨程，华为溪村论坛，东莞, 2024. (邀请报告)
[29] T. Zhong, C. Yang, A semi-analytical model to predict the flow-induced noise of an open cavity with complex geometry, INTERNOISE, Virtual (August 1-5, 2021). (invited)
[28] P. Zhang, Y. Huang, C. Yang, Effect of axially segmented liner distribution on sound attenuation in a flow duct, INTERNOISE, Seoul, Korea (August 23-26, 2020). (invited)
[27] 杨程，张鹏林，基于延长管技术的低频线性声衬，中国航空学会声学分会学术会议，网络，（2020）.
[26] 张鹏林，杨程，黄煜，分段声衬的轴向分布对其吸声性能的影响研究，中国航空学会声学分会学术会议，网络，（2020）.
[25] C. Yang, P. Zhang, S. Sack and M. Åbom, Low frequency duct noise control using extended tube liners, AIAA Aviation Forum, Virtual Event (June 15-19, 2020).
[24] S. Sack, C. Yang, M. Åbom, Applications of AI methods in duct acoustics, The 178th Meeting of the Acoustical Society of America, San Diego, USA (December 2-6, 2019).
[23] C. Yang, S. Sack, M. Åbom, Optimal damping for a bend containing a microperforated panel, The 178th Meeting of the Acoustical Society of America, San Diego, USA (December 2-6, 2019).
[22] 杨程，微穿孔吸声结构的实际降噪效果，上海-西安声学学会第六届声学学术交流会，上海(October, 2019).（invited）
[21] 杨程，含有微穿孔板结构的弯管声学特性研究，中国声学大会，深圳(September, 2019).
[20] 钟庭生，杨程，薄膜型隔声罩设计，中国航天第十专业信息网2019度学术交流会，福州(2019).
[19] 杨程，一种高效的声衬阻抗提取技术，第二届全国气动噪声及控制技术学术会议，贵阳(2019).
[18] C. Yang, P. Zhang, T. Zhong, A preliminary study of the acoustic attenuation of a thin acoustic liner, INTERNOISE, Madrid, Spain (June 16-19, 2019). (invited)
[17] P. Zhang, Y. Huang, C. Yang, A parallel integration scheme of eigen solutions for duct acoustic modes, INTERNOISE, Madrid, Spain (June 16-19, 2019). (invited)
[16] 杨程，吴海军，蒋伟康，一种无背腔的微穿孔板吸声设计，中国声学大会，北京(2018).
[15] C. Yang, Acoustic absorption of a microperforated panel without the backing cavity, INTERNOISE, Chicago, USA (August 26-29, 2018). (invited)
[14] C. Yang, P. Zhang, Y. Huang, W. Jiang, An investigation of the suitability of an alternative boundary condition for an impedance eduction technique, The 6th conference on noise and vibration – emerging method, Ibiza, Spain (May 7-9, 2018).
[13] C. Yang, Sound attenuation in a curved duct using a microperforated panel, The 173rd Meeting of the Acoustical Society of America, Boston, USA (June 25-29, 2017). (invited)
[12] C. Yang, F. Y. Tao, X. Zhang, On the acoustic properties of a hole in a wall of finite thickness, Acoustics 2016, Fremantle, Australia (November 9-11, 2016).
[11] C. Yang, Control of interior noise by micro-perforated panel, Up 2 High Frequencies Summer School, Lyon, France (July 1-3, 2015). (poster)
[10] X. Yu, C. Yang, L. Cheng, Microperforates for acoustic noise control applications, The 23rd International Conference on Noise and Fluctuations, Xian, China (June 2-6, 2014).
[9] Z. Y. Hu, C. Yang, L. Cheng, Helmholtz Resonators for tonal noise reduction in manned spacecraft structure, The 4th East Asia Mechanical and Aerospace Engineering Workshop, Hong Kong (October 24-25, 2014).
[8] C. Yang, L. Cheng, Micro-perforated panel absorber in small-scale cavity, The 21st International Congress on Sound and Vibration, Beijing, China (July 13-17, 2014).
[7] L. Cheng, X. Yu, C. Yang, Micro-perforates in vibroacoustic systems, The 18th Annual Conference of HKSTAM, Hong Kong (March 15, 2014)
[6] C. Yang, L. Cheng, A note on the coupling mechanisms of Micro-perforated Panel Absorber, INTERNOISE, Innsbruck, Austria (September 15-18, 2013).
[5] C. Yang, J. Pan, L. Cheng, Performance analysis of the Wave Trapping Barrier, Acoustics 2012, Fremantle, Australia (November 21-23, 2012).
[4] C. Yang, L. Cheng, Sound Absorption of a Baffled Cavity-backed Micro-perforated Panel Absorber under Oblique and Diffused Incidence, 14th Asia Pacific Vibration Conference, Hong Kong, China (December 5-8, 2011).
[3] C. Yang, D. Li, L. Cheng, Dynamic vibration absorbers for vibration control within a frequency band, 14th Asia Pacific Vibration Conference, Hong Kong, China (December 5-8, 2011).
[2] C. Yang, L. Cheng, Sound absorption of a baffled cavity-backed micro-perforated panel absorber under oblique and diffused incidence, INTERNOISE, Osaka, Japan (September 4-7, 2011).
[1] L. Maxit, C. Yang, L. Cheng, J. L. Guyader, Modeling of micro-perforated panels effect in a complex vibro-acoustic environment using Patch Transfer Function approach, INTERNOISE, Osaka, Japan (September 4-7, 2011).

ME2221 材料力学（钱学森班）48学时 本科
ME3215 机械振动学 48学时 本科
ME6151 先进噪声控制技术（英文）48学时 研究生

 一种变质心涵道无人机的结构及其控制方法, CN2024109330763
 一种喷水推进泵降噪结构, CN202310348869
 一种基于叶顶声学超材料的涵道无人机降噪装置, CN202210695068
 一种延长管型穿孔板蜂窝夹层吸声结构, CN201910624932
 管道高阶声模态发生装置, CN202110406235
 SJTU-Prop飞行器旋翼辅助设计软件, 2022SR0485295
 一种圆形管道声模态径向波数的数值求解方法

2023 – Now 中国空气动力学会气动声学专业组委员
2022 – Now 中国振动工程学会会员
2019 – Now 美国航空宇航学会会员
2018 – Now 上海市声学学会理事
2018 – Now 中国声学学会会员
2015 – Now 美国声学学会会员

社会服务：
1. Journal of the Acoustical Society of America、Journal of Sound and Vibration、AIAA Journal、Applied Acoustics、Mechanical Systems and Signal Processing and other (10+) acoustics、vibration、mechanics journals, etc 等期刊审稿人。
2. 瑞典皇家理工学院、诺丁汉大学博士答辩评审委员。

学生培养：
2024 蔡博文、李家兴、何庆塱、蒋优扬、赵志恒、范恩铭，第十九届“挑战杯”全国大学生课外学术科技作品竞赛“揭榜挂帅”专项赛——大型无人机用高效低噪声螺旋桨设计，特等奖
2024 蔡博文，第十届中国研究生未来飞行器创新大赛，二等奖
2024 李家兴，第四届全国计算声学大会，优秀论文
2023 赵志恒，第三届全国计算声学大会，优秀论文
2023 赵培栋，第30届全国振动与噪声高技术应用学术会议，优秀论文

Professional:
2018 上海市浦江人才
2013 国际噪声控制工程学会，Young Professionals Grant
2013 香港声学学会，Meyer Poon Memorial Award
2011 香港理工大学，Research Student Attachment Grant

Personal:
2011 1st Runner-up, Hong Kong International Dragon Boat Races.
2010 2nd Runner-up, Hong Kong International Dragon Boat Races.
2004 东南大学机械工程学院篮球赛冠军
2003 东南大学机械工程学院3V3篮球赛冠军