2004-2008 上海交通大学 博士

2010- 上海交通大学  助理研究员、副教授、教授

2012-2013  挪威科技大学 访问研究员

换热器仿真优化与强化传热
高精度制冷温控系统
飞机制冷温控
氢液化/LNG换热器
航空航天热设计
储能与海洋能源
高效换热器及能源系统
相变流动传热机理与模拟
固态/液氢储氢系统设计与工艺

2025-2028 国家自然科学基金，主持
2020-2023 国家自然科学基金，主持
2016-2019 国家自然科学基金，主持
2010-2012 国家自然科学基金，主持
2024-2026 高效传热机理及设计，工信部子课题，主持
2024-2026 能源系统动态仿真，工信部子课题，主持
2021-2015 温控技术研究，基础重大专项，主持
2020-2025 飞行器高效传热温控技术，科技部子课题，主持
2024-2026 上海市“探索者计划”，主持
2020-2021 国家重点实验室基金，主持
2019-2022 上海市科委项目，主持
2019-2021 商飞联合基金，主持
2017-2019 航天一院联合基金，主持
2017-2019 国防重点实验室基金，主持
2017-2020 上海市经信委项目，合作方主持
2023-2024 储氢换热器仿真优化，主持
2023-2024 飞机辅助冷却系统国产化关键技术，主持
2024-2024 大型液化装置制冷换热设备选型评价研究，主持
2023-2028 “多相流强化传热与换热器仿真软件、优化设计”，主持
2023-2025 飞机灭火剂充注投放特性研究，主持
2023-2024 空调智能节能和节能仿真，主持
2015-2017 上海市科委项目，主持
2020-2022 **热惯量特性模拟平台，主持
2020-2021 氧气管道内流动特性模拟”，主持；
2019-2020 冷却器仿真设计及研制”，主持
2018-2020 基于数据的系统故障诊断，主持；
2019-2020 飞机水废水系统故障诊断，主持
2017-2020 飞机冷却系统动态仿真模型开发，主持；
2019-2020 充气过程仿真及换热器设计，主持；
2022.12—2023.12 企业委托项目“空调智能节能和节能仿真软件”，主持；
2020.3—2020.8 企业委托项目“分配器内多相流动分配特性模拟”，主持
2020.4—2020.10 企业委托项目“管翅式换热器仿真及选型软件开发”，主持；
2019.5—2020.05 企业委托项目“空气换热器性能仿真及选型软件开发”，主持；
2019.3—2019.11 企业委托项目“换热器性能模拟及智能仿真优化设计”，主持；
2017.4—2017.12 企业委托项目“换热器性能模型开发”，主持；
2016.3—2018.05 企业委托项目“FLNG换热器冷箱性能实验及模型”，主持；
2016.03—2017.12 企业委托合作项目“大型客机辅助冷却系统仿真研究”，主持；
2015.08—2016.06 企业委托合作项目“空调换热器优化设计分析”，主持；
2014.09—2016.06 企业委托合作项目“满液式机组换热器仿生优化”，主持；

2024年
【13】Chang, S. Numerical thermal analysis and structural optimization of cascaded PCM heat sinks for thermal management of electronics. International Journal of Heat and Mass Transfer, 236, 126301.
【12】Lin D. et al. Offshore methanol synthesis process by CO2 hydrogenation. 2024
【11】Li X. Numerical model of aerial drop characteristic of mass firefighting units for aerial firefighting. Fire Safety Journal. 150 (2024) 104263
【10】Hui Y, Li X, Lei R, et al. Boiling heat transfer characteristics of distributed jet array impingement on metal foam-covered surface[J]. International Journal of Heat and Mass Transfer, 2024, 233: 126038.
【9】Hui Y, Li X, Lei R, et al. Boiling heat transfer characteristics of distributed jet array impingement on metal foam covers with different wettability[J]. International Journal of Refrigeration, 2024, 167: 90-101.
【8】Chang S.J. et al. Numerical investigation on heat transfer characteristics of cascaded PCM heat sinks for thermal management. Journal of Energy Storage. 2024
【7】Li Y, Hu H, Lei R. Dynamic modelling of supplemental cooling systems with vapor compression refrigeration units in civil aircrafts[J]. Applied Thermal Engineering, 2024, 248: 123285.
【6】LI X. et al. Performance Analysis of a Vapor Injection Linear Compressor in a Dual-Temperature Zone Refrigerator. International Journal of Refrigeration, 2024, 162: 74-85.
【5】Hui Y. et al. Boiling heat transfer characteristics of confined jet impingement on metal foam with different structures. Applied Thermal Engineering. 2024: 123554.
【4】Hu et al. Numerical investigation on propane flow condensation in zigzag channel of printed circuit heat exchanger. Applied Thermal Engineering. 2024: 123645.
【3】LI Y. et al. Dynamic Modelling of Supplemental Cooling Systems with Vapor Compression Refrigeration Units in Civil Aircrafts. Applied Thermal Engineering. 2024, 248: 123285.
【2】Chang S.J. et al. Experimental study of novel paraffin-fatty acid eutectic mixtures for thermal management of electronic devices. Journal of Energy Storage, 84, Part A, 15 April 2024, 110846.
【1】 Hui Y. et al. Experimental investigation on confined jetimpingement boiling heat transfer characteristics on metal foam cover. Applied Thermal Engineering Volume 236, Part D, 10 January 2024, 121806.

2023年
【8】Li Y. et al. Performance simulation and diagnosis of faulty states in air-cycle refrigeration systems in civil aircrafts. International Journal of Refrigeration, Volume 156, December 2023, Pages 232-242.
【7】Yuhan Li, Rui Lei, Haitao Hu, Kangzuo Zhao. A black box based model for phase change heat exchanger in refrigeration system simulations using Kriging interpolation method. International Journal of Refrigeration. 2023, 153, 231-239.
【6】Hu H, Chang S, Li Y, et al. Design and thermal characteristic test of a temperature control system for spacecraft precision instrument[J]. International Journal of Refrigeration, 2023, 146: 462-470.
【5】Hu H, Zhao Y, Sheng J, et al. Influence of surface wettability on heat transfer and pressure drop characteristics of R1234ze (E) flow boiling in metal foam filled tubes[J]. International Journal of Refrigeration, 2023, 146: 366-374.
【4】Hu H, Li J, Li Y, et al. Experimental investigation on flow boiling characteristics in offset strip fin channels under different sloshing conditions[J]. Experimental Thermal and Fluid Science, 2023, 145: 110880.
【3】Li Y, Hu H, Sun H, et al. Dynamic simulation model for three-wheel air-cycle refrigeration systems in civil aircrafts[J]. International Journal of Refrigeration, 2023, 145: 353-365.
【2】Hu H, Li Y, Li J. Experimental investigation on flow boiling characteristics in zigzag channels under different sloshing conditions[J]. Applied Thermal Engineering, 2023, 230: 120780.
【1】Hu H, et al. Research progress on flow and heat transfer characteristics of fluids in metal foams. Renewable and Sustainable Energy Reviews, Volume 171, January 2023, 113010.

2022
【3】Duan Z, Sun H, Wu C, et al. Flow-network based dynamic modelling and simulation of the temperature control system for commercial aircraft with multiple temperature zones[J]. Energy, 2022, 238: 121874.
【2】Duan Z, Sun H, Wu C, et al. Multi-objective optimization of the aircraft environment control system based on component-level parameter decomposition[J]. Energy, 2022, 245: 123330.
【1】Yuhan Li, Haitao Hu, et al. DYNAMIC SIMULATION MODEL FOR THREE-WHEEL AIR-CYCLE REFRIGERATION SYSTEMS IN CIVIL AIRCRAFTS. International Journal of Refrigeration, 2022 (https://doi.org/10.1016/j.ijrefrig.2022.08.026).

[9] Haitao Hu, et al. Measurement and correlation for two-phase frictional pressure drop characteristics of flow boiling in printed circuit heat exchangers. International Journal of Refrigeration, Volume 129, September 2021, Pages 69-77.
[8] Haitao Hu, et al. Heat transfer and pressure drop of refrigerant flow boiling in metal foam filled tubes with different wettability. International Journal of Heat and Mass Transfer, Volume 177, October 2021, 121542
[7] Haitao Hu, Zhancheng Lai, et al. Droplet shedding characteristics on metal fibers with different wettability and inclined angles. International Journal of Refrigeration. 2021. (Accepted,DOI: 10.1016/j.ijrefrig.2021.05.030; Available online 25 May 2021)
[6] Haitao Hu, et al. Influence of surface wettability on pool boiling heat transfer on metal foam covers. International Journal of Thermal Sciences, Volume 168, October 2021, 107069 (DOI: 10.1016/j.ijthermalsci.2021.107069)
[5] Haitao Hu, Li J, Xie Y, et al. Experimental investigation on heat transfer characteristics of flow boiling in zigzag channels of printed circuit heat exchangers[J]. International Journal of Heat and Mass Transfer, 2021, 165: 120712.
[4] Haitao Hu, Li J. Experimental investigation on heat transfer characteristics of two-phase flow boiling in offset strip fin channels of plate-fin heat exchangers. Applied Thermal Engineering, 2021, 185: 116404.
[3] Jianrui Li, Haitao Hu, Youhu Zhang. Experimental investigation and correlation development for two-phase pressure drop characteristics of flow boiling in offset strip fin channels. International Journal of Thermal Sciences, 2021, 160:106693
[2] Li J, Hu H, Xie Y, et al. Two-phase flow boiling characteristics in plate-fin channels at offshore conditions[J]. Applied Thermal Engineering, 2021, 187: 116595.
[7] 赵雅鑫，胡海涛等. R1234ze(E)在泡沫金属管内的流动沸腾换热和压降特性. 化工学报，2021（网络首发时间：2021-06-11）
[6] 胡海涛，赖展程等. 泡沫金属结构对流动沸腾换热特性的影响. 制冷学报，2021.4 （网络首发时间：2021-04-20）
[5] 王兆奇;李孟山;胡海涛等. 双排对折型微通道换热器仿真模型开发。化工学报，2021（S1）
[4] 谢瑶;李剑锐;胡海涛. 印刷电路板式换热器内超临界甲烷流动换热特性模拟. 化工学报，2021（S1）
[3] 张弛;李浩;胡海涛等. 基于自动特征工程的客机压缩机轴承故障诊断研究. 化工学报（封面论文），2021（S1）: 430-436
[1] **孙浩然, 吕中原, 吴成云, 等. 机载补气增焓制冷系统动态仿真模型[J]. 化工学报, 2021: 10-15.

2020年【2篇】
[11] Hu, H. Zhao Y. et al. Experimental investigation on nucleate pool boiling heat transfer characteristics on hydrophobic metal foam covers. Applied Thermal Engineering, 179 (2020) 115730.
[10] Haitao Hu, Jianrui Li, Yao Xie, Yongdong Chen. Experimental investigation on heat transfer characteristics of flow boiling in zigzag channels of printed circuit heat exchangers. International Journal of Heat and Mass Transfer, 2020.
[9] Jianrui Li, Haitao Hu, Youhu Zhang. Experimental investigation and correlation development for two-phase pressure drop characteristics of flow boiling in offset strip fin channels. International Journal of Thermal Sciences, 2021, 160:106693
[8] Jianrui Li, Haitao Hu, Haoxian Wang. Numerical investigation on flow pattern transformation and heat transfer characteristics of two-phase flow boiling in the shell side of LNG spiral wound heat exchanger. International Journal of Thermal Sciences, 152 (2020) 106289.
[6] Yuxin FU，Alain VALTZ，Snaïde AHAMADA，Haitao HU，Christophe COQUELET. Density data for carbon dioxide (CO2) +trans-1,3,3,3-tetrafluoroprop-1-ene (R-1234ze(E)) mixture at temperatures from 283.32 to 353.02K and pressures up to 10MPa. International Journal of Refrigeration 120 (2020) 430–444.
[5] 李阳, 常守金, 胡海涛, 孙浩然, 赖展程, 2020. 飞行器机载精密仪器温控系统性能的实验研究. 化工学报, 71(S1), 77-82.
[4] 密晓光, 陈杰, 余思聪, 等. LNG 绕管式换热器壳侧两相流动压降特性的实验研究[J]. 制冷技术, 2018, 1.
[3] 吴静玮 张弛 胡鸣鹤 李剑锐 孙浩然 胡海涛 魏文建. 晃荡工况下板翅式换热器封头内两相流分配模拟. 制冷技术. 2020,(05), 16-21, 28
[2] 魏文建 常守金 丁二刚 胡海涛. 不同结构风冷换热器风侧特性对比分析. 制冷技术. 2020,(05) 53-57
[1] 张弛 胡海涛 魏文建 毛英超. 制冷剂在近三角形微通道内流动沸腾特性的模拟分析. 制冷技术. 2020,(03) 18-23。52476013

Haitao Hu, Sun, H., Wu, C., Wang, X., & Lv, Z. A steady-state simulation model of supplemental cooling system integrated with vapor compression refrigeration cycles for commercial airplane. Applied Thermal Engineering, 2019, 114692.
Haitao Hu, Zhou F, Lai Z, et al. Influence of surface wettability on liquid drainage characteristics of metal foams under sloshing conditions[J]. International Journal of Refrigeration, 2019. (June 2019)
Haitao Hu, Lai Z, Ding G. Influence of surface wettability on heat transfer and pressure drop characteristics of wet air in metal foam under dehumidifying conditions[J]. International Journal of Thermal Sciences, 2019, 135: 331-343.(January 2019)
Haitao Hu, Ding C, Ding G, et al. Heat transfer characteristics of two-phase mixed hydrocarbon refrigerants flow boiling in shell side of LNG spiral wound heat exchanger[J]. International Journal of Heat and Mass Transfer, 2019, 131: 611-622 (March 2019)
Haitao Hu, Lai Z, Ding G. Heat transfer and pressure drop characteristics of wet air flow in metal foam with hydrophobic coating under dehumidifying conditions[J]. Applied Thermal Engineering, Volume 132, 5 March 2018, Pages 651-664--2
Haitao Hu, Yang G, Ding G, et al. Heat transfer characteristics of mixed hydrocarbon refrigerant flow condensation in shell side of helically baffled shell-and-tube heat exchanger[J]. Applied Thermal Engineering, 2018, 133: 785-796.—1(March 2018)
Haitao Hu, Zhancheng Lai, et al. Experimental investigation on water drainage characteristics of open-cell metal foams with different wettabilities. International Journal of Refrigeration, 2017, 79: 101-113.
Haitao Hu, Xiaomin Weng, et al. Numerical model of dehumidifying process of wet air flow in open-cell metal foam[J]. Applied Thermal Engineering, 2017, 113: 309–321.
Haitao Hu, Eikevik T.M., et al. Performance analysis of a R744 ground source heat pump system with air-cooled and water-cooled gas coolers. International Journal of Refrigeration, 2016, 63: 72–86
Haitao Hu, Xiaomin Weng, et al. Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions[J]. Applied Thermal Engineering, 2016,93(25): 1124–1134.
Haitao Hu, Ruxu Zhang, et al. Numerical model of two-phase refrigerant flow distribution in a plate evaporator with distributors. Applied Thermal Engineering, 2015,75:167-176.
Haitao Hu, Yu Zhu, et al, Influence of tube diameter on heat transfer characteristics of refrigerant-oil mixture flow boiling in metal-foam filled tubes, International Journal of Refrigeration, 2014, 41, 121-136.
Haitao Hu, Yu Zhu, et al. Effect of tube diameter on pressure drop characteristics of refrigerant-oil mixture flow boiling inside metal-foam filled tubes. Applied Thermal Engineering 2014, 62: 433-443.
Haitao Hu, Yu Zhu, et al. Effect of oil on two-phase pressure drop of refrigerant flow boiling inside circular tubes filled with metal foam. International Journal of Refrigeration, 2013, 36(2): 516–526.
Haitao Hu, Hao Peng, Guoliang Ding. Nucleate pool boiling heat transfer characteristics of refrigerant/nanolubricant mixture with surfactant.International Journal of Refrigeration, 2013, 36(3): 1045–1055.
Haitao Hu, Guoliang Ding, et al. Experimental investigation and correlation of two-phase heat transfer of R410A/oil mixture flow boiling in a 5 mm microfin tube. Journal of Enhanced Heat Transfer, 2011, 18 (3): 209–220.
Haitao Hu, Guoliang Ding, et al. Heat transfer characteristics of refrigerant-oil mixtures flow boiling in a horizontal C-shape curved smooth tube. International Journal of Refrigeration, 2010, 33(5):932-943
Haitao Hu, Guoliang Ding, et al. Measurement and Correlation of Flow Boiling Heat Transfer of R410A/Oil Mixture inside a 4.18 mm Horizontal Straight Smooth Tube. HVAC&R Research, 2009, 15 (2): 287-314.
Haitao Hu, GuoLiang Ding, et al. Pressure drop during horizontal flow boiling of R410A/oil mixture in 5 mm and 3 mm smooth tubes. Applied Thermal Engineering, 2009, 29 (16): 3353-3365.
Haitao Hu, Guoliang Ding, et al. Heat transfer characteristics of R410A-oil mixture flow boiling inside a 7 mm straight smooth tube. Experimental Thermal and Fluid Science, 2008, 32: 857-869.
Haitao Hu, Guoliang Ding, et al. Measurement and correlation of frictional pressure drop of R410A/POE oil mixture flow boiling inside a 7 mm straight microfin tube. Applied Thermal Engineering, 2008, 28: 1272-1283.
Haitao Hu, Guoliang Ding, Kaijian Wang. Heat transfer characteristics of R410A-oil mixture flow boiling inside a 7 mm straight microfin tube. International Journal of Refrigeration, 2008, 31 (6): 1081- 1093.
Haitao Hu, Guoliang Ding, et al. Measurement and Correlation of Frictional Pressure Drop of R410A/Oil Mixture Flow Boiling in a 7 mm Straight Smooth Tube. HVAC&R Research, 2008, 14 (5): 763-781
Haitao Hu, Yu Zhu, et al. Enhanced heat transfer characteristic during nucleate pool boiling of refrigerant/oil mixture under high oil concentration condition by metal foam. Proceedings of the 23rd IIR International Congress of Refrigeration, August 21-26, 2011, Prague, Czech Republic.【主题报告(Keynote)，分会场主席(Session Chair)】.
Haitao Hu, Xudong XU, et al. Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions: numerical model and experimental validation. International Conference of Cryogenics and Refrigeration Technology, Bucharest, Romania. June 22-25, 2016
Haitao Hu, Jie Chen, et al. Falling film flow and evaporation characteristics at shell-side of spiral wound heat exchanger under different conditions. International Conference of Cryogenics and Refrigeration Technology, Bucharest, Romania. June 22 – 25, 2016.
Haitao Hu, Yi Ding, Xiaomin Weng, Dawei Zhuang, Kairui Wu, Xudong Xu. Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions [C]. 24th IIR International Congress of Refrigeration, Yokohama, Japan, 2015.
Lai, Z., Haitao Hu, Ding, G., Weng, X. (2017). Influence of pore density and porosity on the wet air flow in metal foam under different operation conditions. International Journal of Refrigeration.
Guoliang Ding, Haitao Hu, et al. Experimental investigation and correlation of two-phase frictional pressure drop of R410A–oil mixture flow boiling in a 5 mm microfin tube. International Journal of Refrigeration, 2009, 32 (1): 150-161.
Yu Zhu, Haitao Hu, et al. Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 1–Two-phase flow pattern visualization. International Journal of Heat and Mass Transfer, 2015, 91, 446-453.
Yu Zhu, Haitao Hu, et al. Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 2–A flow-pattern based prediction method for heat transfer. International Journal of Heat and Mass Transfer, 2015, 91, 502-511.
Yu Zhu, Haitao Hu, et al. Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes. Applied Thermal Engineering, 2013, 50(1): 1246-1256.
Yu Zhu, Haitao Hu, et al. Heat transfer enhancement by metal foam during nucleate pool boiling of refrigerant/oil mixture at a wide range of oil concentration. HVAC&R RESEARCH, 2012, 18 (3): 377-389.
Yu Zhu, Haitao Hu, et al. Influence of oil on nucleate pool boiling heat transfer of refrigerant on metal foam covers. International Journal of Refrigeration, 2011, 34(2): 509-517.
Dawei Zhuang, Haitao Hu, et al. Numerical model for liquid droplet motion on vertical plain-fin surface. HVAC&R Research, 2014, 20(3): 332-343.
Hao Peng, Guoliang Ding, Haitao Hu, Weiting Jiang. Effect of nanoparticle size on nucleate pool boiling heat transfer of refrigerant/oil mixture with nanoparticles. International Journal of Heat and Mass Transfer, 2011, 54: 1839-1850.
Hao Peng, Guoliang Ding, Haitao Hu. Effect of surfactant additives on nucleate pool boiling heat transfer of refrigerant-based nanofluid. Experimental Thermal and Fluid Science, 2011, 35 (6): 960-970.
Hao Peng, Guoliang Ding, Haitao Hu. Migration of carbon nanotubes from liquid-phase to vapor-phase in the refrigerant-based nanofluid pool boiling. Nanoscale Research Letters, 2011, 6: 219.
Hao Peng, Guoliang Ding, Haitao Hu. Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. Part I: Experimental measurement. International Journal of Refrigeration, 2011, 34(8): 1823-1832.
Hao Peng, Guoliang Ding, Haitao Hu. Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. Part II: Model development and validation. International Journal of Refrigeration, 2011, 34(8): 1833-1845.
Hui Pu, Guoliang Ding, Haitao Hu, Yi-feng Gao. Effect of salt spray corrosion on air-side hydrophilicity and thermal-hydraulic performance of copper-fin heat exchangers. Heat and Mass Transfer, 2010, 46 (8-9): 859-867. (SCI: 000282216400008, IF: 0.896)
Hui Pu, Guoliang Ding, Haitao Hu, Yifeng Gao. Effect of salt spray corrosion on air-side performance of finned tube heat exchanger with hydrophilic coating under dehumidifying conditions. HVAC&R Research, 2010, 16(3): 257-272. (SCI: 000277866000002, IF: 0. 683)
Yang, Y., Zhuang, D., Ding, G., Haitao Hu. (2016). A mathematic model for predicting the volume of water bridge retaining between vertical fin surfaces. International Journal of Refrigeration, 67, 157-166.
Yang, Y., Zhuang, D., Ding, G., Haitao Hu. (2016). Observation and description of the shape of water bridge retaining between vertical plane surfaces. International Journal of Refrigeration, 64, 20-31.
Haitao Hu*, Yu Zhu, Guoliang Ding. Enhanced heat transfer characteristics during nucleate pool boiling of refrigerant/oil mixture under high oil concentration condition by metal foam. Proceedings of the 23rd IIR International Congress of Refrigeration, August 21-26, 2011, Prague, Czech Republic (Keynote Speech).
Lai, Z., Haitao Hu, Ding, G. (2018). Effect of porosity on heat transfer and pressure drop characteristics of wet air in hydrophobic metal foam under dehumidifying conditions. Experimental Thermal and Fluid Science, 96, 90-100. (September 2018)
Lai, Z., Haitao Hu, Ding, G., & Weng, X. (2018). Influence of pore density and porosity on the wet air flow in metal foam under different operation conditions. International Journal of Refrigeration, 88, 117-128.( April 2018)
Yang G, Haitao Hu, Ding G, et al. Experimental investigation on heat transfer characteristics of two-phase propane flow condensation in shell side of helically baffled shell-and-tube condenser[J]. International Journal of Refrigeration, 88, 2018, Pages 58-66(April 2018)
Ding, C., Haitao Hu, Ding, G., Chen, J., Mi, X., Yu, S. Influences of tube pitches on heat transfer and pressure drop characteristics of two-phase propane flow boiling in shell side of LNG spiral wound heat exchanger. Applied Thermal Engineering, 2018, 131: 270-283.( 25 February 2018)
Sun, H., Haitao Hu, et al. (2018). A theory-based explicit calculation model for variable speed scroll compressors with vapor injection. International Journal of Refrigeration, 88, 402-412.( April 2018)
Yang G, Haitao Hu, Ding G, et al. Influence of component proportion on heat transfer characteristics of ethane/propane mixture flow condensation in shell side of helically baffled shell-and-tube heat exchanger[J]. Experimental Thermal and Fluid Science, 2018, 97: 381-391.( October 2018)
Lai Z, Haitao Hu, Ding G. Influence of pore density on heat transfer and pressure drop characteristics of wet air in hydrophilic metal foams[J]. Applied Thermal Engineering, 2019: 113897.( August 2019)
Zhou, F., Haitao Hu., Lai, Z., & Ding, G. (2019). Experimental study on liquid drainage characteristics of metal foams under sloshing conditions. International Journal of Refrigeration, 99, 351-362. (March 2019)
Sun, H., Haitao Hu, Ding, G., Chen, H., Zhang, Z., Wu, C., & Wang, L. (2019). A general distributed-parameter model for thermal performance of cold box with parallel plate-fin heat exchangers based on graph theory. Applied Thermal Engineering, 148, 478-490.( 5 February 2019)
Wang, S., Fauve, R., Coquelet, C., Valtz, A., Houriez, C., Artola, P. A., ... Haitao Hu. (2019). Vapor–liquid equilibrium and molecular simulation data for carbon dioxide (CO2)+ trans-1, 3, 3, 3-tetrafluoroprop-1-ene (R-1234ze (E)) mixture at temperatures from 283.32 to 353.02 K and pressures up to 7.6 MPa. International Journal of Refrigeration, 98, 362-371.
Wei Wu, Guoliang Ding, Haitao Hu. Experimental investigation of fin-and-tube heat exchanger with smaller diameter tubes. The 6th Asian Conference on Refrigeration and Air Conditioning, August 26-28, 2012, Xian, China.

1）课程名称：工程设计     授课对象：本科生；
2）课程名称：工程与社会  授课对象：本科生；
上海市一流本科课程、重点课程（结题优秀）。
主编《工程与社会》教材，纸质+数字教材。
主持教育部+校级教改项目6项，获评课程思政示范课程。

3）课程名称：制冷原理及设备 授课对象：本科生；
4)  课程名称：流体力学泵与风机   授课对象：本科生；

专利：一种可用于超低温制冷的嵌入式平板蒸发器
专利：一种偏心式套管换热器
专利：一种强化自然对流的圆盘式超低温蒸发器
专利：一种小型超低温生物样本库制冷系统
专利：一种带有折弯结构的水平安装多孔分配器
专利：一种多排翅片管换热器性能快速仿真与设计方法
专利：一种基于热管散热的机载精密测量仪器温控装置
专利：一种基于图论的大型客机辅助冷却系统仿真建模方法
专利：一种基于数据驱动和模型的制冷系统制冷剂泄漏探测方法
专利：一种基于局部线性化理论的变频补气压缩机性能计算方法
专利：一种配管以及具有该配管结构的大型冷箱；授权号：ZL 201720257477.7（排1）；
专利：一种气液分配部件以及具有该部件的封头和板翅式换热器,CN201720193179.6
专利：一种除霜过程中室内不间断制热的空调系统,CN201510189288.6
专利：一种适用于摇晃工况的板翅式换热器,CN201820136502.0
专利：一种改善液体分布不均的板翅式换热器,CN201820137127.1
专利：CO2-油混合物跨临界循环换热测量装置；授权号：ZL 2009 1 0050459.1 （排1）；
专利：基于泡沫金属强化沸腾换热的芯片冷却装置；授权号：ZL 201210100441.X （排1）。
专利：一种空调器无水加湿装置；授权号：ZL 2014 10101113.0 （排1）；
专利：气泡导流满液式壳管蒸发器；授权号：ZL 2015 21008655.X（排1）；
专利：具有气道的满液式壳管蒸发器；授权号：ZL 201521010330.5（排1）；
专利：一种多源耦合的二氧化碳地源热泵系统；授权号：ZL 201410735908.7（排1）；
专利：一种防液击空调除霜系统；授权号：ZL 201510287888.6（排1）；
专利：基于弓形折流板的管壳式换热器；授权号：ZL 201620548167.6（排4）。

《制冷技术》，常务副主编；
上海市制冷学会副秘书长、理事 /编译委员会副主任；
压力容器换热器委员会，委员
全国虚拟仿真实验室教学创新联盟能动类，副主任委员
全国制冷空调新技术研讨会，组委会主席、委员、分会场主席
国际制冷大会，分会场主席
国际制冷学会会员

期刊审稿专家：
Applied Energy; Energy
International Journal of Thermophysics
International Journal of Heat and Mass Transfer；
Physics of Fluids;
Journal of Heat Transfer；
International Journal of Multiphase Flow;
International Communications in Heat and Mass Transfer；
Applied Thermal Engineering,
 International Journal of Refrigeration, 
International Journal of Thermal Science

省部级奖励
2022 教育部科技进步奖（排1）
2021 中国仿真学会科学技术一等奖
2019 上海市科技进步一等奖
2014 中国机械工业科技进步一等奖
2014 中国制冷学会科技进步一等奖
2017 中国制冷学会科学技术青年奖
2017 中国制冷学会先进工作者
2009 上海市科技进步二等奖
2010 上海市科技进步三等奖
中国制冷学会“新中国成立70周年暖通空调与制冷行业创新成果”
《家电科技》优秀创新团队
工程热物理学会传热传质分会"王补宣-过增元青年优秀论文二等奖"

校级：
上海交通大学晨星青年学者奖励计划
上海交通大学“十佳班主任”
上海交通大学“优秀班主任”
毕业设计优秀设计优胜奖
上海交通大学”盛宣怀杯“第二十四届创新创业大赛 银牌
毕业设计-校企合作毕业设计项目“最具人气奖”
上海交通大学科研成果二等奖
毕业设计项目展“最佳展示奖”、“优秀设计优胜奖”